DEV 3530
MODULO EDFA Boost Amplifier
The MODULO HFCHybrid fiber-coaxial (HFC) is a telecommunications industry term for a broadband network that combines optical fiber and coaxial cable. product portfolio is enhanced by the DEV 3530 MODULO EDFAEDFA (Erbium-Doped Fiber Amplifier) is an optical device that amplifies an optical signal without converting it to electrical . EDFA's are commonly used in DWDM applications.
Boost Amplifier. In a compact 1 RU chassis the device provides a single EDFAEDFA (Erbium-Doped Fiber Amplifier) is an optical device that amplifies an optical signal without converting it to electrical . EDFA's are commonly used in DWDM applications.
Boost-Amplifier with one optical input port and one optical output port. The integrated controller is used for monitoring and control via Web InterfaceThe DEV Web Interface is an enhanced graphical user interface (GUI) to monitor and control all functions, features and settings available for DEV devices.
or SNMPSimple Network Management Protocol (SNMP) is a remote protocol used for managing devices in M&C Systems.
.
DEV 3530 
MODULO EDFA Boost Amplifier
Features

  • 1 RU Chassis with single EDFAEDFA (Erbium-Doped Fiber Amplifier) is an optical device that amplifies an optical signal without converting it to electrical . EDFA's are commonly used in DWDM applications. Boost-Amplifier, 1 Output
  • High GainGain is defined as the ratio of the output power to the input power in dB. If a device provides gain the input signal will be amplified (gained) and thereof the output signal amplitude is typically higher than the one of the incoming signal. and low Noise FigureNoise figure (NF) is a measure of degradation of the signal to noise ratio (S/N), caused by components in a radio frequency signal chain. It is a number by which the performance of a radio receiver or system can be specified. The noise figure is simply the noise factor expressed in decibels (dB). EDFAEDFA (Erbium-Doped Fiber Amplifier) is an optical device that amplifies an optical signal without converting it to electrical . EDFA's are commonly used in DWDM applications. Amplifier
  • Automatic Output Power Control (APCAPC (Automatic output power control) used in optical amplifiers (EDFA) to ensure constant output power automatically. ) Operation Mode
  • Monitoring of Input and Output Optical Power Level
  • Front Panel Status and Alarm LEDs
Benefits

  • The stand-alone device is ideal for HFCHybrid fiber-coaxial (HFC) is a telecommunications industry term for a broadband network that combines optical fiber and coaxial cable. applications which require the use of an EDFAEDFA (Erbium-Doped Fiber Amplifier) is an optical device that amplifies an optical signal without converting it to electrical . EDFA's are commonly used in DWDM applications. amplifier
  • The device can be intergrated in a MODULO system due to the recessed chassis assembly and it additionally provides power supply redundancy plus monitoring and control via the DEV Web InterfaceThe DEV Web Interface is an enhanced graphical user interface (GUI) to monitor and control all functions, features and settings available for DEV devices. and via SNMPSimple Network Management Protocol (SNMP) is a remote protocol used for managing devices in M&C Systems.