L-Band & 10 MHz RF over Fiber Link DEV 7244 & DEV 7344
This analog RF over FiberRF over Fiber solutions convert analog RF signals into optical which are then transmitted over optical fibers and converted back to RF at various frequency bands.
link combines L-BandL-Band stands for the frequency range 950...2150 MHz.
and 10 MHz reference signal transmission over one fiber in one module. It provides variable gain and high linearity. The plug and play and easy handling character makes it the ideal L-BandL-Band stands for the frequency range 950...2150 MHz.
over Fiber link for uplink stations where 10 MHz reference is needed. Transmit and receive modules fits into all indoor and outdoor chassis of the RF over FiberRF over Fiber solutions convert analog RF signals into optical which are then transmitted over optical fibers and converted back to RF at various frequency bands.
Optribution series.
L-Band & 10 MHz RF over Fiber Link DEV 7244 & DEV 7344
Features

  • L-BandL-Band stands for the frequency range 950...2150 MHz. & 10 MHz Reference Signal over a single Fiber
  • Recommended for RF over FiberRF over Fiber solutions convert analog RF signals into optical which are then transmitted over optical fibers and converted back to RF at various frequency bands. Links with optical Losses up to 10 dBdB is a logarithmic unit used to describe a ratio, here usually of power.
  • Adjustable gain for L-BandL-Band stands for the frequency range 950...2150 MHz. and 10 MHz reference signal
  • LNBA Low-Noise Block down converter (LNB) is the receiving device mounted on satellite dishes used for satellite TV reception, which collects the micro waves from the dish. It receives the microwave signal from the satellite collected by the dish, amplifies it, down converts the block of frequencies to a lower block of intermediate frequencies typically L-Band. powering with bias current monitoring with Tx-Module
  • RF SensingRF Sensing measures the accumulated RF power over the entire bandwidth. This value is a quality indication to either just send an alarm to a M&C System or to perform a redundancy switching fully autonomously. for L-BandL-Band stands for the frequency range 950...2150 MHz. and 10 MHz reference signal
  • Optical Connector Type SC/APCThe SC/APC Connector is an optical connector 8° angled originally developed by a NTT using a push-pull mechanism. , FC/APCThe FC/APC Connector is an optical connector 8° angled originally developed by a NTT using a screw connection. This connector is often used in military application. or E2000 HRLThe E2000 HRL Connector is an optical connector 8° angled originally developed by a Swiss company Diamond using a push-pull mechanism. A special feature of the connector is its self-opening protective cap, which minimizes the risk of contamination of the optical facet and eliminates the need for a separate protective cap.
Benefits

  • Due to RF optical signal transmission almost no frequency dependent loss
  • 10 MHz reference and L-BandL-Band stands for the frequency range 950...2150 MHz. signal over one fiber
  • With LNBA Low-Noise Block down converter (LNB) is the receiving device mounted on satellite dishes used for satellite TV reception, which collects the micro waves from the dish. It receives the microwave signal from the satellite collected by the dish, amplifies it, down converts the block of frequencies to a lower block of intermediate frequencies typically L-Band. powering included no need for additional equipment
  • Easy plug and play installation