L-Band Distributing Matrix ARCHIMEDES
DEV 1986

The powerful, compact and smarter ARCHIMEDES L-BandL-Band stands for the frequency range 950...2150 MHz.
Matrix SwitchMatrix Switches are IRD controlled switches providing 4 inputs and up to 64 outputs. Each IRD connected to an output can choose the appropriate input. See also IRD Controlled Switch. sets the latest industry benchmark in performance, size and price. It hosts a 64 x 64 RF Matrix configuration within 4 RU. Upgradable versions up to 2048 x 2048 are available. Optical inputs, unique redundancy options for inputs and controller, and many more extras offer ultra-flexibility and reliability. Each RF input port’s LNBA Low-Noise Block down converter (LNB) is the receiving device mounted on satellite dishes used for satellite TV reception, which collects the micro waves from the dish. It receives the microwave signal from the satellite collected by the dish, amplifies it, down converts the block of frequencies to a lower block of intermediate frequencies typically L-Band.
power option is capable of delivering switchable LNBA Low-Noise Block down converter (LNB) is the receiving device mounted on satellite dishes used for satellite TV reception, which collects the micro waves from the dish. It receives the microwave signal from the satellite collected by the dish, amplifies it, down converts the block of frequencies to a lower block of intermediate frequencies typically L-Band.
power. The ARCHIMEDES Matrix SwitchMatrix Switches are IRD controlled switches providing 4 inputs and up to 64 outputs. Each IRD connected to an output can choose the appropriate input. See also IRD Controlled Switch. includes an integrated TV Receiver featuring a multi-touch display for content monitoring.
L-Band Distributing Matrix ARCHIMEDES
DEV 1986L-Band Distributing Matrix ARCHIMEDES
DEV 1986
Features

  • 950…2150 MHz
  • 75 Ohm F (f) or BNC (f) and 50 Ohm SMA (f)
  • Optical Inputs
  • 24x24 up to 64x64 (Upgradable versions, up to 2048x2048, are available)
  • Hot-Pluggable Modules
  • Variable GainVariable Gain is adjustable amplification for active devices in a specified range.
  • Variable Tilt
  • RF SensingRF Sensing measures the accumulated RF power over the entire bandwidth. This value is a quality indication to either just send an alarm to a M&C System or to perform a redundancy switching fully autonomously.
  • LNB PowerLNB Power is the voltage and current to be fed to a LNB to operate the LNB and potential Line Amplifiers. ing incl. Current Monitoring, 13/18 V & 0/22 kHz
  • Full Color Multi-Touch Display as Local User Interface
  • Integrated TV-Receiver
  • Fully Integrated Spectrum Analyzer (ISA) (please refer to separate Spec Sheet "devISA_IntegratedSpectrumAnalyzer" in section SYSTEM-LEAFLETS)
  • Input Channel Redundancy
  • Controller Redundancy
  • Power Supply RedundancyPower supply redundancy is the duplication or even triplication of the power supply as a critical component or function of the system with the intention of increasing reliability of the system, usually in the case of a backup or fail-safe. In case of no failure load sharing between the installed power supplies ensures an increased MTBF.
  • Secure Lock Operation
  • DEV Web InterfaceThe DEV Web Interface is an enhanced graphical user interface (GUI) to monitor and control all functions, features and settings available for DEV devices.
  • SNMPSimple Network Management Protocol (SNMP) is a remote protocol used for managing devices in M&C Systems. Support
Benefits

  • Smallest Matrix up to 64x64
  • Various connector and impedance options allows flexible use
  • Intelligent software options makes the matrix a key part of a transmission system
  • Multi-Color-Touch Display as a local user interface enable full control
  • First matrix on the market which allows to check the content via the integrated TV Receiver
  • With optical Inputs compatible with Optical LNBA Low-Noise Block down converter (LNB) is the receiving device mounted on satellite dishes used for satellite TV reception, which collects the micro waves from the dish. It receives the microwave signal from the satellite collected by the dish, amplifies it, down converts the block of frequencies to a lower block of intermediate frequencies typically L-Band. , Dual Fiber Output Ku-band PLL LNBA Low-Noise Block down converter (LNB) is the receiving device mounted on satellite dishes used for satellite TV reception, which collects the micro waves from the dish. It receives the microwave signal from the satellite collected by the dish, amplifies it, down converts the block of frequencies to a lower block of intermediate frequencies typically L-Band. , from Swedish Microwave