RF over Fiber Indoor Chassis | DEV 7114

The DEV 7114 is a 4 RU chassis providing 16 slots for RF over Fiber modules of the Optribution series plus integrated RF distribution. With the integrated controller all functionalities are accessible via the intuitive DEV Web Interface or via SNMP protocol. The DEV 7114 can be configured for 1+1 redundancy or N+1 redundancy operation. Configuration versatility and flexible RF signal distribution forms the migration path for highest integration of RF and optical functionalities within a single chassis.

SKU: DEV 7114 Category: Tags: , , , ,

Description

The DEV 7114 is a 4 RU chassis providing 16 slots for RF over Fiber modules of the Optribution series plus integrated RF distribution. With the integrated controller all functionalities are accessible via the intuitive DEV Web Interface or via SNMP protocol. The DEV 7114 can be configured for 1+1 redundancy or N+1 redundancy operation. Configuration versatility and flexible RF signal distribution forms the migration path for highest integration of RF and optical functionalities within a single chassis.

  • Space and Cost saving Solution, Merge of RF Signal Distribution and RF optical Transmission
  • Increased Signal Performance and reduced Power Consumption due to integrated Functionalities
  • Enhanced System Reliability via 1+1 Redundancy or N+1 Redundancy
  • Permanent Signal Monitoring and Recording
  • Intuitive and complete Operation with DEV Web Interface
  • Complete SNMP-MIB for seamless Integration into all common M&C Systems

 

Additional information

Connectors

F, SMA

Available Features

CWDM, Redundant Power Supplies, RF Sensing, SNMP and DEV Web Interface

Frequency Range

L-Band, Optical

Height in Rack Units (RU)

4 RU

Impedance

50 Ohm, 75 Ohm

Interface

Ethernet [RJ-45], Optical Ethernet [SC/PC]

Indoor/Outdoor Usage

Indoor

Features

 

  • RF over Fiber Modules of the Optribution Series
  • RF optical Transmission plus RF Distribution from 1:4 up to 1:128
  • IRD controlled Switches from 4×16 up to 4×64
  • 1+1 Redundancy
  • N+1 Redundancy
  • CWDM for 4, 8, and 9 Channels
  • Ethernet to Optical Converter
  • 50 Ohm SMA (f), 75 Ohm F (f), and 75 Ohm BNC (f)
  • DEV Web Interface
  • Automatic Switch Back for 1+1 Redundancy
  • Redundancy Path Gain Compensation (RGC) for N+1 Redundancy
  • Signal Recording and Data Backup
  • SNMP Support
  • Power Line Redundancy
  • Power Supply Redundancy

 

Available Options

  • Additional Power Module 16 V, 50 W horizontal Use for 4 RU Chassis
  • Automatic Switch Back
  • Change Ethernet to optical Ethernet Interface
  • IRD Controlled Switch Options
  • Distribution Options

Downloads

Datasheet | DEV 7114

You may also like…