L-Band Distributing RF Matrix 8²
DEV 1982

The 8² RF Matrix SwitchMatrix Switches are IRD controlled switches providing 4 inputs and up to 64 outputs. Each IRD connected to an output can choose the appropriate input. See also IRD Controlled Switch. is the most versatile L-BandL-Band stands for the frequency range 950...2150 MHz.
Matrix up to 8x8 in 1 RU. Electrical as well as optical inputs, unique redundancy options and many more features provide great flexibility and reliability. The LNBA Low-Noise Block down converter (LNB) is the receiving device mounted on satellite dishes used for satellite TV reception, which collects the micro waves from the dish. It receives the microwave signal from the satellite collected by the dish, amplifies it, down converts the block of frequencies to a lower block of intermediate frequencies typically L-Band.
power option for each RF input port is capable of delivering switchable LNBA Low-Noise Block down converter (LNB) is the receiving device mounted on satellite dishes used for satellite TV reception, which collects the micro waves from the dish. It receives the microwave signal from the satellite collected by the dish, amplifies it, down converts the block of frequencies to a lower block of intermediate frequencies typically L-Band.
power. An extra switchable output port allows permanent monitoring of the system. The graphical local user interface allows an easy and convenient control.
L-Band Distributing RF Matrix 8²
DEV 1982
Features

  • 950…2150 MHz
  • 4x4 up to 8x8 in 1 RU
  • Optical Inputs
  • 75 Ohm F (f) or BNC (f) and 50 Ohm SMA (f)
  • Hot-Pluggable Modules
  • Variable GainVariable Gain is adjustable amplification for active devices in a specified range.
  • Variable Tilt
  • RF SensingRF Sensing measures the accumulated RF power over the entire bandwidth. This value is a quality indication to either just send an alarm to a M&C System or to perform a redundancy switching fully autonomously.
  • Extra switchable Output Port for Monitoring
  • LNB PowerLNB Power is the voltage and current to be fed to a LNB to operate the LNB and potential Line Amplifiers. ing incl. Current Monitoring, 13/18 V & 0/22 kHz
  • Graphical Local User Interface
  • Input Channel Redundancy
  • Secure Lock Operation
  • DEV Web InterfaceThe DEV Web Interface is an enhanced graphical user interface (GUI) to monitor and control all functions, features and settings available for DEV devices.
  • Signal Recording and Data BackupData Backup is part of the DEV Web Interface, that makes it possible to save and restore device or instrument data as well as error log information of DEV devices. The stored data can be accessed on the device itself (SD-Card) and can be exported to a connected PC.
  • SNMPSimple Network Management Protocol (SNMP) is a remote protocol used for managing devices in M&C Systems. Support
  • Power Supply RedundancyPower supply redundancy is the duplication or even triplication of the power supply as a critical component or function of the system with the intention of increasing reliability of the system, usually in the case of a backup or fail-safe. In case of no failure load sharing between the installed power supplies ensures an increased MTBF.
Benefits

  • Extra switchable Output Port allows permanent Monitoring while the System remains in Service
  • Most versatile Matrix up to 8x8 in 1 RU
  • Various Connector and Impedance The Impedance -in Ohm (Ω)- is an important parameter for the characterization of an RF port.Options allows flexible Use
  • Intelligent Software Options makes the Matrix a Key Part of a Transmission System
  • Graphical Local User Interface enable Full Control
  • With optical Inputs compatible with Optical LNBA Low-Noise Block down converter (LNB) is the receiving device mounted on satellite dishes used for satellite TV reception, which collects the micro waves from the dish. It receives the microwave signal from the satellite collected by the dish, amplifies it, down converts the block of frequencies to a lower block of intermediate frequencies typically L-Band. , Dual Fiber Output Ku-band PLL LNBA Low-Noise Block down converter (LNB) is the receiving device mounted on satellite dishes used for satellite TV reception, which collects the micro waves from the dish. It receives the microwave signal from the satellite collected by the dish, amplifies it, down converts the block of frequencies to a lower block of intermediate frequencies typically L-Band. , from Swedish Microwave